Bike-Bus Lanes

"Overview

bike-bus-lane.jpg

Bike-bus lanes are travel lanes restricted to buses, bicycles, and (usually) vehicles turning right. The lane is separated from general purpose lanes by a solid white line, and designated by signs and painted legends. This configuration requires bicyclists and buses to pass one another in "leapfrog" fashion. Cities employing shared bike-bus lanes include Tucson, AZ; Madison, WI; Toronto, Ontario; Vancouver, BC; and Philadelphia, PA.

Shared vs. Separate Lanes

On a busy arterial street with conventional bike lanes, buses frequently block the bike lane at bus stops. Bicyclists may also be squeezed between the door zone of parked cars on the right and adjacent traffic on the left. A shared lane eliminates these issues, but may introduce new hazards. However, many bicyclists feel the shared bike-bus lane functions better than a conventional bike lane [1] because bus traffic tends to be relatively light, bus drivers are professionally trained to coexist with bicyclists, and buses can merge partway into the adjacent lane to overtake a bicyclist. Nevertheless, many local traffic departments are reluctant to allow bicyclists access to bus-only lanes. This effectively disenfranchises bicyclists on streets where dedicated bus lanes have been deployed, but denying bicyclists access to them.
In some cities, bicycle lanes are provided to the left of dedicated bus lanes (see photo). This introduces turning conflicts where buses turn left across the bike lane, and bicyclists turn right across the bus lane, and motorists turn right across both.minneapolis-bike-then-bus-lane.jpg

Safety Studies

A reportedly suppressed study by Transport for London leaked to the London Telegraph [2] indicates that on two corridors where bicycles and motorized cycles were allowed in bus lanes, bicyclist crashes were reduced 44%.
Bike-bus lanes have been used in French and German cities. Paris and Bordeaux have shared lane networks of 118 and 40km, respectively. According to the German Cycling Federation [3], the Federal Ministry of Transportation reports bicycles are safer using bus lanes, and bus operations are not negatively affected by this arrangement. The Ministry states that, where traffic speeds exceed 30 mph, the width of the lane should be at least 4 meters (13 feet) to allow bicyclists to overtake a bus without entering an adjacent lane. Narrower widths, typically 3.0 meters (10.5 - 11.5 feet) are acceptable in lower speed environments (20mph or less). By contrast, the City of Madison, Wisconsin, prefers a width of 16 feet, but may allow widths of 14 feet or even less when necessary.
For safe sharing of bike-bus lanes, education of bus drivers is considered important. In early 2008, Chicago Mayor Richard Daley proposed opening that city's dedicated bus lanes to bicycles, with an intent to provide training to all bus drivers prior to launching the program [4].




ALSO ON THE LIVABLE STREETS NETWORK



REFERENCES

Each source is referred to by the same number every time it is cited. Please keep citation style consistent.
[1] John S. Allen's Bicycle Facilities, Laws, and Program Pages.
[2] Telegraph.co.uk. The truth about bikes and bus lanes, 1/25/08

[3] German Cycling Federation page, translated into English here.
[4] CBS2.com, Daley proposes bike riders use bus lanes, 6/14/08.



PICTURE REFERENCES

Pictures are cited in the order they appear above. Please keep citation style consistent.
[1] Milwaukee Avenue Bike-Bus Lane, Chicago, IL, courtesy Steve Vance, Flickr 2008.
[2] Marquette Avenue, Minneapolis, Minnesota, courtesy John S. Allen"


 Fonte:
http://www.livablestreets.com/streetswiki/bike-bus-lanes

Sem comentários:

Enviar um comentário